New residential
Slab pads and footings through Lucas, Alfredton, Winter Valley and the western growth estates, engineered to the soil report.
Western Victoria
Screw Piling
Ballarat & the Highlands.
Certified screw pile foundations across Ballarat and the Central Highlands, on the heavy clay and worked ground the region sits on. AS2159 engineered, 100% Australian-made piles, full certification with every install.
The ground here
Heavy clay, wet ground, worked history.
Ballarat gives a foundation three things to deal with at once. The ground is largely heavy clay over weathered bedrock and basalt, the region takes more rainfall and colder winters than most of the state so that clay sits saturated for long stretches of the year, and the older suburbs carry the same goldfields legacy of shallow historic workings and backfilled ground that runs through this part of Victoria.
Wet, heavy, reactive clay is difficult ground for anything that relies on an open excavation or a concrete pour. A screw pile avoids both. It is rotated down through the reactive upper zone and anchored in stable material below, with no pit to dig, no water sitting in an open hole, and almost no spoil to cart off a site that is already soft underfoot.
That makes it a practical option through a Ballarat winter as well as a structural one. The install leaves established gardens, paths and driveways largely intact on the older infill blocks, and every pile is driven to the design torque and certified to AS2159 on completion.
The specs
Engineered to AS2159
Australian-made, load-certified, suited to most Victorian soil profiles.
Pile sizes
76 to 114 mm
Stocked standard range. Larger sizes upon request.
Load capacity
10,000 to 25,000+ kg
Per-pile for standard stocked range.
Soil suitability
Most profiles
Heavy clay over weathered bedrock, saturated for long stretches, with historic worked ground.
Service life
50, 75, 100+ years
When properly designed, installed to torque, and corrosion-rated for the soil profile.
Where it fits
Ballarat project types
The same piling method, scaled to the project. Residential through to civil and government.
Extensions & decks
Additions, granny flats and large decks around established homes and mature gardens, with minimal excavation.
Wet & sloping sites
Blocks that stay soft through winter or fall away across the site, where an open excavation is impractical.
Commercial & civil
Retail and modular commercial pads, signage, utility and gantry foundations, engineered to spec and audit ready.
Service area
Ballarat and surrounds
Central Highlands coverage, with the machine and pile stock brought to site.
Greater Ballarat
All suburbs
Ballarat East and Central, Alfredton, Lucas, Winter Valley, Sebastopol, Wendouree and Buninyong.
Central Highlands
Town to town
Creswick, Clunes, Daylesford, Bacchus Marsh and Ballan across the surrounding highlands.
Western district
On request
Ararat, Beaufort and further west where the job scope justifies the travel. Send the site details.
How an install runs
From first call to certified install
A clear five-step process. Itemised quote, engineered to spec, certified on completion.
-
Send the details
Email plans, engineering, and a soil report to sales@totalpiling.com.au, or call Rob or Tom.
-
Accurate quote
Pile counts, sizes, depth, connection detail, certification - all on the page, all priced.
-
Engineered to spec
Pile sizing and depth confirmed against your engineer's design and the soil report. Adjustments handled before we book in, not on the day.
-
Installed on site
Crew arrives in Ballarat with the right machine and pile stock for the job. Install torque is recorded on each pile.
-
Certified & handed over
AS2159 certification and full documentation handed over. Engineered to spec, load-tested, ready to build on.
Common questions
Screw piling in Ballarat, answered
Can screw piles go in through a Ballarat winter?
The method suits wet ground better than the alternatives, because there is no open excavation to fill with water and no concrete curing in a saturated profile. Site access and the engineer's design still govern what happens on any given job, so send the plans and soil report through and we will quote it against the actual conditions.
Does the heavy clay around Ballarat cause foundation movement?
Reactive clay moves as it takes on and gives up moisture, and that movement is concentrated in the upper active zone. A screw pile is driven through that zone and anchored in stable load-bearing material underneath, so the structure is supported below the layer that is doing the moving.
Do you cover Creswick, Daylesford and Bacchus Marsh?
Yes. The Central Highlands towns sit within the service area, along with Clunes, Ballan and out toward Ararat where the job warrants it. We bring the machine, the pile stock and the certification with us.
What do you need to quote a Ballarat job?
Plans, the engineering, and a soil report if you have one. That gives us pile counts, sizes, depth and connection detail to price properly, and the quote comes back itemised rather than as an estimate. Email them to sales@totalpiling.com.au or call Rob or Tom.
Where we work
Screw piling across Victoria
Melbourne metro plus the regional centres. We bring the machine, the pile stock and the certification with us.
Screw Piling Melbourne
The main service page. Metro Melbourne and statewide coverage, residential through to government.
Screw Piling Echuca
Murray floodplain ground, riverfront and rural builds, and the Campaspe corridor across to Moama.
Screw Piling Geelong
Reactive basalt clay across the plains and sand over clay toward the Bellarine coast.
Screw Piling Bendigo
Variable goldfields ground, sloping blocks and heritage sites across central Victoria.
Screw Piling Shepparton
Deep alluvial Goulburn Valley soils, agricultural pads and food processing footings.
Screw Piling Traralgon
Latrobe Valley alluvial flats and made ground, residential through to industrial and plant.
Ready when you are
Quote your Ballarat screw piling job.
Send the plans, engineering, and soil report. We'll come back with a quote, no obligation.