South west Victoria

Screw Piling
Geelong & the Bellarine.

Certified screw pile foundations across Geelong, the growth corridor and the Bellarine coast. AS2159 engineered, 100% Australian-made piles, and full certification with every install.

The ground here

Two very different ground profiles.

Geelong is really two foundation problems in one region. Across the northern and western plains, through Corio, Lara, Norlane and out into the Armstrong Creek growth corridor, the ground is basalt-derived reactive clay. It swells when it takes water and shrinks back when it dries, and that seasonal movement is the single most common cause of foundation trouble in this part of the state.

Head toward the coast and the problem inverts. Through the Bellarine and the surf coast side the profile turns to sand over clay with a water table that can sit close to the surface, which is loose and low-bearing near the top and needs the load carried down to something competent underneath.

Screw piles answer both. In reactive clay the pile passes straight through the active zone and anchors below it, so the structure is not riding the seasonal movement. In coastal sand the pile is taken down to the bearing layer with the install torque recorded on every pile against the engineer's design. No concrete, no excavation pit, and minimal disruption to established landscaping on the infill blocks.

Total Piling branded excavator driving screw piles on a waterfront residential site

The specs

Engineered to AS2159

Australian-made, load-certified, suited to most Victorian soil profiles.

Pile sizes

76 to 114 mm

Stocked standard range. Larger sizes upon request.

Load capacity

10,000 to 25,000+ kg

Per-pile for standard stocked range.

Soil suitability

Most profiles

Reactive basalt clay across the plains, sand over clay and high water table toward the coast.

Service life

50, 75, 100+ years

When properly designed, installed to torque, and corrosion-rated for the soil profile.

Where it fits

Geelong project types

The same piling method, scaled to the project. Residential through to civil and government.

Growth corridor residential

New homes and slab pads through Armstrong Creek, Charlemont, Lara and the surrounding estates, engineered to the soil report.

Coastal & waterfront

Bellarine and bayside builds, decks and pool surrounds on sandy profiles and high water table sites.

Extensions & decks

Additions, second-storey adds, granny flats and large decks on reactive clay blocks. Tight access capable through side gates.

Commercial & multi-unit

Multi-house developments, modular commercial buildings and retail pads, delivered as a programmed pile grid.

Service area

Geelong and surrounds

Covered off the Melbourne base, with the machinery and pile stock to match the site.

Greater Geelong

All suburbs

Corio, Lara, Norlane, Belmont, Highton, Waurn Ponds and the Armstrong Creek corridor.

The Bellarine

Coast to coast

Ocean Grove, Barwon Heads, Drysdale, Portarlington and Queenscliff, on coastal sand and high water table profiles.

Surf Coast

On request

Torquay, Jan Juc and along the coast where the job scope justifies the travel. Send the site details.

How an install runs

From first call to certified install

A clear five-step process. Itemised quote, engineered to spec, certified on completion.

  1. Send the details

    Email plans, engineering, and a soil report to sales@totalpiling.com.au, or call Rob or Tom.

  2. Accurate quote

    Pile counts, sizes, depth, connection detail, certification - all on the page, all priced.

  3. Engineered to spec

    Pile sizing and depth confirmed against your engineer's design and the soil report. Adjustments handled before we book in, not on the day.

  4. Installed on site

    Crew arrives in Geelong with the right machine and pile stock for the job. Install torque is recorded on each pile.

  5. Certified & handed over

    AS2159 certification and full documentation handed over. Engineered to spec, load-tested, ready to build on.

Common questions

Screw piling in Geelong, answered

Are screw piles suitable for Geelong's reactive clay?

Yes, and reactive clay is one of the profiles they suit best. The clay through the Geelong plains swells and shrinks with moisture, and that movement is concentrated in the upper active zone. A screw pile passes through that zone entirely and anchors in stable load-bearing material below, so the structure sits on ground that is not moving seasonally.

What about sandy coastal blocks on the Bellarine?

Sand over clay with a high water table is a normal screw pile situation. The pile is taken down past the loose surface material to the bearing layer specified by the engineer, and because it is driven rather than poured, there is no open excavation filling with water and no concrete curing in a wet profile.

Do you cover Torquay, Ocean Grove and the surf coast?

Yes. Geelong, the Bellarine and the surf coast are all within the service area, and we bring the machine and pile stock with us. Send the plans, engineering and soil report with the site address and we will quote it.

Do you charge more because you are based in Melbourne?

Send the job details through and the quote will be itemised: pile counts, sizes, depth, connection detail and certification, all on the page and all priced. We work across Victoria as a matter of course, so regional work is normal for us rather than an exception.

Ready when you are

Quote your Geelong screw piling job.

Send the plans, engineering, and soil report. We'll come back with a quote, no obligation.